Global Mixer Functions

At the edges of the mixer window there are a number of buttons for cross-track control of the mixer window and mixer behavior.

Mixer Setup and Help

Setup: Click on the Setup button to open the Mixer Setup dialog. ? opens the help for the mixer, i.e. the text you are just reading.

Reset Mixer

The buttons under Resets allow you to reset various properties of the mixer.

Reset AUX: This resets all AUX sends. Reset EQ: This resets all equalizer settings. Reset Peaks: This resets the LED peak meters (peak hold display). Reset FX: This removes the effects in all channels.

Reset (Mono): This resets the entire mixer to its default settings for mono tracks. The tracks are alternately set to 100% Right and Left.

Reset (Stereo): This resets the entire mixer to its default settings for stereo tracks. The pan controls are set to center position and all special track pan settings are reset.

Loading and Saving Mixer Settings

You can save the state of the entire mixer into Snapshots. (For hardware mixers this is called "Total Recall"). This includes the levels of all volume and AUX send controls as well as all track effect settings and routings. Click one of the buttons to save. To load the snapshot, click this button again. To overwrite a saved snapshot, click the button while holding down the Shift key. Double-click in the name window to name the snapshots. The last loaded snapshot is highlighted.

Load mixer settings / Save mixer settings: With these buttons you can save the current mixer settings to a file (*.mix) to use them in other projects and load saved mixer settings.

In the context menu of a snapshot button you can reach further functions:

• Load/Save Snapshots: This corresponds to the function of the button, Delete Snapshot deletes the snapshot from the button

• Next Bank/Previous Bank: A project can contain a total of 32 snapshots in 4 banks, use these commands to change the displayed bank.

• Save mixer to file: This corresponds to the function of the Save mixer settings buttons (without snapshots).

• Save mixer with snapshots: Use this option to save the current mixer settings and all snapshots. When loading mixer settings that contain snapshots, you are asked whether the snapshots should also be loaded. If so, the snapshots of the project are overwritten by all snapshots of the file.

• Load mixer from file / Load mixer from file (including track names): You can load mixer settings both with and without track names.

• Load last mixer: When loading a snapshot, the current mixer settings are temporarily cached and can be retrieved with the command Load last mixer. This also allows an A-B comparison between the snapshot's and the current settings.

• Include record/monitoring states: If this option is activated, the record arm and monitoring states are also adjusted when loading snapshots and mixer files.

With Menu View > More > Load Mixer Snapshot you open a menu from which you can select the desired entry with the arrow keys and confirm it with the Enter key. If you also assign a keyboard shortcut to this menu item, you can switch snapshots in this way completely keyboard controlled.

Playback Functions

Solo/Mute: Use the S and M buttons to toggle all Solo/Mute buttons on and off. Bypass: This button allows you to turn off all effects active in the project except for the volume and pan settings of the channels for comparison purposes. AutoRec: This display will light up if the level automation is written in the master.

Play/Stop: This button can be used to play and stop the project, a right click opens the transport console.

View

Hide Tracks/Hide Master: These buttons can be used to hide the tracks or the master section in the mixer.

Mixer layout snapshots: If the arrangement has many tracks, usually only a part of all mixer channels is displayed in the mixer window. The scroll bars at the bottom and right edge of the mixer can be used to move the visible section.

In the Track Manager, you can also hide individual tracks in the mixer. The four snapshot buttons allow you to save this visibility state of the tracks together with the current section, i.e. the first track displayed in the mixer, and then restore a specific view with one click. To save, click one of the four buttons on the left edge of the mixer. To load the snapshot, click this button again. To overwrite a saved snapshot, Shift-click the button.

With Menu View > More > Load Mixer Layout Snapshot you open a menu from which you can select the desired entry with the arrow keys and confirm it with the Enter key. If you also assign a keyboard shortcut to this menu item, you can switch the layouts in this way completely keyboard controlled.

Global Solo modes without monitor bus

If you cannot or do not want to use the Hybrid Engine or do not want to use a Monitor Bus for other reasons, you can also select Monitor Bus inactive (---). The following differences then exist:

• Solo In Place is always active and cannot be deactivated.

• Also in "Solo in Place" mode it is possible to switch between Pre Fader Listen and After Fader Listen. With a monitor bus, PFL is no longer In Place.

Attention: In this mode it is possible to influence the master level with the monitor control. This means you can set up the listening level in the mixer without using any external volume controllers. The audible result in this case differs from the peak meter display. Therefore, the numerical level values in the mixer are displayed in red. Additionally, the Solo knob influences the volume of the soloed tracks that are played through the master section. However, the internal level for the export remains unchanged.